Join Windows worker nodes to a swarm

Estimated reading time: 6 minutes

These are the docs for UCP version 2.2.4

To select a different version, use the selector below.

UCP supports worker nodes that run on Windows Server 2016. Only worker nodes are supported on Windows, and all manager nodes in the swarm must run on Linux.

Follow these steps to enable a worker node on Windows.

  1. Install UCP on a Linux distribution.
  2. Install Docker Enterprise Edition (Docker EE) on Windows Server 2016.
  3. Configure the Windows node.
  4. Join the Windows node to the swarm.

Install UCP

Install UCP on a Linux distribution. Learn how to install UCP on production. UCP requires Docker EE version 17.06 or later.

Install Docker EE on Windows Server 2016

Install Docker EE on a Windows Server 2016 instance to enable joining a swarm that’s managed by UCP.

Configure the Windows node

Follow these steps to configure the docker daemon and the Windows environment.

  1. Pull the Windows-specific image of ucp-agent, which is named ucp-agent-win.
  2. Run the Windows worker setup script provided with ucp-agent-win.
  3. Join the swarm with the token provided by the UCP web UI.

Pull the Windows-specific images

On a manager node, run the following command to list the images that are required on Windows nodes.

$ docker container run --rm docker/ucp:2.2.4 images --list --enable-windows
docker/ucp-agent-win:2.2.4
docker/ucp-dsinfo-win:2.2.4

On Windows Server 2016, in a PowerShell terminal running as Administrator, log in to Docker Hub with the docker login command and pull the listed images.

PS> docker image pull docker/ucp-agent-win:2.2.4
PS> docker image pull docker/ucp-dsinfo-win:2.2.4

Run the Windows node setup script

You need to open ports 2376 and 12376, and create certificates for the Docker daemon to communicate securely. Run this command:

PS> docker container run --rm docker/ucp-agent-win:2.2.4 windows-script | powershell -noprofile -noninteractive -command 'Invoke-Expression -Command $input'

Docker daemon restart

When you run windows-script, the Docker service is unavailable temporarily.

The Windows node is ready to join the swarm. Run the setup script on each instance of Windows Server that will be a worker node.

Compatibility with daemon.json

The script may be incompatible with installations that use a config file at C:\ProgramData\docker\config\daemon.json. If you use such a file, make sure that the daemon runs on port 2376 and that it uses certificates located in C:\ProgramData\docker\daemoncerts. If certificates don’t exist in this directory, run ucp-agent-win generate-certs, as shown in Step 2 of the Set up certs for the dockerd service procedure.

In the daemon.json file, set the tlscacert, tlscert, and tlskey options to the corresponding files in C:\ProgramData\docker\daemoncerts:

{
...
		"debug":     true,
		"tls":       true,
		"tlscacert": "C:\ProgramData\docker\daemoncerts\ca.pem",
		"tlscert":   "C:\ProgramData\docker\daemoncerts\cert.pem",
		"tlskey":    "C:\ProgramData\docker\daemoncerts\key.pem",
		"tlsverify": true,
...
}

Join the Windows node to the swarm

Now you can join the UCP cluster by using the docker swarm join command that’s provided by the UCP web UI. Learn to add nodes to your swarm. The command looks similar to the following.

PS> docker swarm join --token <token> <ucp-manager-ip>

Run the docker swarm join command on each instance of Windows Server that will be a worker node.

Configure a Windows worker node manually

The following sections describe how to run the commands in the setup script manually to configure the dockerd service and the Windows environment. The script opens ports in the firewall and sets up certificates for dockerd.

To see the script, you can run the windows-script command without piping to the Invoke-Expression cmdlet.

PS> docker container run --rm docker/ucp-agent-win:2.2.4 windows-script

Open ports in the Windows firewall

UCP and Docker EE require that ports 2376 and 12376 are open for inbound TCP traffic.

In a PowerShell terminal running as Administrator, run these commands to add rules to the Windows firewall.

PS> netsh advfirewall firewall add rule name="docker_local" dir=in action=allow protocol=TCP localport=2376
PS> netsh advfirewall firewall add rule name="docker_proxy" dir=in action=allow protocol=TCP localport=12376

Set up certs for the dockerd service

  1. Create the directory C:\ProgramData\docker\daemoncerts.

  2. In a PowerShell terminal running as Administrator, run the following command to generate certificates.

    PS> docker container run --rm -v C:\ProgramData\docker\daemoncerts:C:\certs docker/ucp-agent-win:2.2.4 generate-certs

  3. To set up certificates, run the following commands to stop and unregister the dockerd service, register the service with the certificates, and restart the service.

    PS> Stop-Service docker
PS> dockerd --unregister-service
PS> dockerd -H npipe:// -H 0.0.0.0:2376 --tlsverify --tlscacert=C:\ProgramData\docker\daemoncerts\ca.pem --tlscert=C:\ProgramData\docker\daemoncerts\cert.pem --tlskey=C:\ProgramData\docker\daemoncerts\key.pem --register-service
PS> Start-Service docker

The dockerd service and the Windows environment are now configured to join a UCP swarm.

Tip: If the TLS certificates aren’t set up correctly, the UCP web UI shows the following warning.

Node WIN-NOOQV2PJGTE is a Windows node that cannot connect to its local Docker daemon.

Uninstall UCP from Windows Server

The following steps return the Docker Engine to its original configuration:

  1. Unregister the docker service and register it again without the TLS certificates:

    Stop-Service docker
dockerd --unregister-service
dockerd -H npipe:// --register-service
Start-Service docker

  2. Remove the certs directory for the docker service:

    Remove-Item -Recurse C:\ProgramData\docker\daemoncerts

  3. Remove the firewall rules:

    netsh advfirewall firewall delete rule name="docker_2376_in"
netsh advfirewall firewall delete rule name="docker_12376_in"
netsh advfirewall firewall delete rule name="docker_2377_in"
netsh advfirewall firewall delete rule name="docker_4789_in"
netsh advfirewall firewall delete rule name="docker_4789_out"
netsh advfirewall firewall delete rule name="docker_7946_in"
netsh advfirewall firewall delete rule name="docker_7946_out"

Windows nodes limitations

Some features are not yet supported on Windows nodes:

  • Networking
    • The swarm mode routing mesh can’t be used on Windows nodes. You can expose a port for your service in the host where it is running, and use the HTTP routing mesh to make your service accessible using a domain name.
    • Encrypted networks are not supported. If you’ve upgraded from a previous version, you’ll also need to recreate the ucp-hrm network to make it unencrypted.
  • Secrets
    • When using secrets with Windows services, Windows stores temporary secret files on disk. You can use BitLocker on the volume containing the Docker root directory to encrypt the secret data at rest.
    • When creating a service which uses Windows containers, the options to specify UID, GID, and mode are not supported for secrets. Secrets are currently only accessible by administrators and users with system access within the container.
  • Mounts
    • On Windows, Docker can’t listen on a Unix socket. Use TCP or a named pipe instead.
UCP, swarm, Windows, cluster